Home Page | CollectionWelcome to TKD CO., LTD

TKD CO., LTD

Home > Product > PDC Cutter > For Oil/Gas Drilling > PDC Cutter For Oil/Gas

Product

PDC Cutter
For Oil/Gas Drilling
For Mining/Construction
PCD Blanks
Polycrystalline Diamond (PCD)
Silicon Based PCD
Cobalt Based PCD
Diamond Wear Parts
Lab-Grown Diamond
CBN/PCBN
others
PCD Tool
diamond vitrified wheel
PDC Cutter For Oil/Gas

PDC Cutter For Oil/Gas

Reading 182 times
Send Inquiries
Details

TKD-PCD insert shave performed exceptionally well in harder to drill formationsall over North American region. TKD designs, engineers, presses, and finishes its own polycrystalline diamond (PCD) products to exact customer specifications to ensureconfidence that their high-performance product will perform under demanding down whole conditions.


Our PDC cutters deliver the highest level of performance throughout the drilling cycle. Whatever the application or drilling conditions, our Cutters meet the challenge to increase efficiency.

图片.png

 

NORMAL SIZE PCD CUTTER SPECIFICATIONS:

图片.png

 

 Quality supervison:

PCD cutters are produced under strict guideline where all high pressure and high temperature materials are regulated. All batchs of pdc cutters are strictly inspected for the following testing steps:

1、Dy penetration to check the cracks occurs on the pcd cutter body.

2、Microscope double checking the appearance of cutters. 3、Impact resistance test for evaluating the impact strength of cutters.

4、Several groups of thermal stable test to make sure every cutters bear high and stable temperature.

5、Vertical turret lathe(VTL) wear test.

-------------------------------------------------

All cutters available in standard diameters of 13mm,16mm and 19mm.

Assured General Purpose cutters can be used in a variety of positions on the drill bit for more cost-effective and reliable drilling. Below is the used drill bit pic from customer’s feedback.

图片.png

2010-2020 all right reserved © TKD CO., LTD Home | About US | Contact | Facebook | Face Book | SiteMap | 豫ICP备18018494号