Home Page | CollectionWelcome to TKD CO., LTD

TKD CO., LTD

Home > News > Technical Knowledge > Dead Center Points with PCD-support bring more productivity

News

Company News
TKD CO., LTD attend shang…
Industry News
The era of "one forev…
The world's four diam…
PCD grinding characterist…
Super hard materials ente…
Technical Knowledge
Comparison of advantages …
Basic knowledge of woodwo…
Knowledge of polycrystall…
PCD Cutting Tool Blanks
Dead Center Points with P…
The similarities and diff…
How to choose PCD tool an…
How to use the PCBN tool …

Dead Center Points with PCD-support bring more productivity

2019-10-09 13:01:14 TKD CO., LTD Reading 23 Times

Diamond PCD Dead Center 1000.jpg


TKD adds a new generation of Dead Center Points to its product line of super wear resistant material solutions. The Dead center is reinforced with polycrystalline diamond (PCD) in the head area. Unlike traditional centering systems with carbide tips, this design advantage extends tool life, increases productivity and improves product quality. In addition, production costs are minimized.

Traditionally the usage of carbide tip always cause overheating, friction and wear (such as cylindrical grinding of cylindrical parts in the automotive industry), so the use of TKD Diamond Dead Center with additional PCD reinforcement becomes "more better" : PCD brings extra hardness, minimizing friction. Thermal conductivity is very good compared to conventional clamping tools without PCD, and wear sensitivity is greatly reduced due to low friction coefficient.

As a result, part manufacturers can make better use of their machine performance and reliably process higher machining speeds or workpiece speeds than ever before. Noise levels and vibrations are also reduced, and even at higher workpiece clamping forces, the risk of chattering marks is greatly reduced. TKD Diamond PCD dead center is the key to improving component quality, reducing cycle times, increasing productivity and saving costs.

Pre: The similarities and differences between diamond grinding wheel and CBN…
Next: PCD Cutting Tool Blanks
2010-2020 all right reserved © TKD CO., LTD Home | About US | Contact | Facebook | Face Book | SiteMap | 豫ICP备18018494号