Home Page | CollectionWelcome to TKD CO., LTD


Home > Product > PCD Blanks > PCD Blanks


PDC Cutter
For Oil/Gas Drilling
For Mining/Construction
PCD Blanks
Polycrystalline Diamond (PCD)
Silicon Based PCD
Cobalt Based PCD
Diamond Wear Parts
Lab-Grown Diamond
PCD Tool
diamond vitrified wheel
PCD Blanks

PCD Blanks

Reading 118 times
Send Inquiries


TKD produce the top quality pcd cutting tool blanks with state of art production facilities. We have large diameter of hydraulic press machine for sintering process, pcd laser cutting equipment, EDM cutting machines, C-scan ultra-sonic scanning equipment for cutting and inspection process etc. PCD blanks/ plates/pads are widely used for the machining of non-ferrous metals and alloys, such as aluminum, copper, aluminum / gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramicplastic, rubber etc, where high abrasion resistance and good surface finish are required. The products are available in 2µm5µm, 10 µm, 20µm25µmand 2+25µm etc.


Features compared with tungsten carbide tools:
1, The hardness of PCD is 80 to 120 times that of tungsten carbide.
2. The thermal conductivity of PCD is 1.5 to 9 times that of tungsten carbide.Its thermal conductivity is  700W/mk. The PCD blank can conduct heat fast
3,  PCD toolings life can exceed carbide cutting tool life 50 to 100 times.

Features compared with natural diamond tools:
1, PCD is more resistant over natural diamond because of its random orientation structure of the diamond particles, and is backed by a carbide substrate. 
2, PCD is more constant in wear due to complete production system for quality consistant control, Natural diamond is a single crystal in nature and has soft and hard grains both,when making into toolings, it will not be well using with soft grains.
3, PCD is cheaper and with various shapes and sizes to choose from for toolings, natural diamond is the limit on these point.

The PCD blank is used in many different fields including aviation, the car industry, electronics,and the wood and stone industry. It applies to varous materials such as nonferrous metal, tungsten carbide, ceramic, nonmetal and composite material.

Materials recommended for cutting with PCD:
 Epoxy resins
 Gold and silver
 Ceramics, unfired
 Plastics and rubber
 Carbon and graphite
 Graphite composites
 Fiberglass composites
 Chipboard and fibreboard
 Zinc and magnesium alloys
 Aluminum and aluminum alloys
 Copper, brass and bronze alloys
 Tungsten carbide, presintered and sintered

Email: sale@tkd-hn.com

Next: PCD Blanks Cutter Tips
2010-2020 all right reserved © TKD CO., LTD Home | About US | Contact | Facebook | Face Book | SiteMap | 豫ICP备18018494号