Polycrystalline Diamond Characterisations for High End Technologies (4)
(a) DND-DMSO seeding suspension particle size distribution; (b) cross-sectional SEM image of freestanding PCD; and (c) corresponding XRD signals from as-grown and nucleation side (NS).The as-grown surfaces of the PCD coat…
2022-1-11 16:06:32
Polycrystalline Diamond Characterisations for High End Technologies (3)
2.3 Mechanical and tribological characterisations of PCDsPolished surfaces of the PCD samples were seen under a ZEISS Supra 35 (Germany) field emission scanning electron microscope (FESEM) with EDAX attachment. Roughness…
2022-1-11 15:53:41
Polycrystalline Diamond Characterisations for High End Technologies (2)
Such Characterisation of the CVD grown PCDs is very essential besides its synthesis. Some techniques which are frequently used for powder samples like, BET surface area analysis, TGA-DSC, Zetasizer particle size measureme…
2022-1-11 15:47:38
Polycrystalline Diamond Characterisations for High End Technologies (1)
AbstractCharacterisations of polycrystalline diamond (PCD) coatings have routinely been done over the past three decades of diamond research, but there is less number of reports on some of its very unique properties. For …
2022-1-11 15:03:40
PCD Cutting Tool Blanks
TKD provides PCD Tool blanks with a diameter of 62mm. This is the largest diameter PCD tool blank made in China. The performance and quality of this large diameter tool blank can be compared with that of element 6, but th…
2019-10-18 13:29:02
Dead Center Points with PCD-support bring more productivity
TKD adds a new generation of Dead Center Points to its product line of super wear resistant material solutions. The Dead center is reinforced with polycrystalline diamond (PCD) in the head area. Unlike traditional centeri…
2019-10-9 13:01:14